Wise Owl Shopper Discounts

3D Printer Parts And Accessories

Mens Hoodie LMMVP Autumn Winter Print Hoodie Tops Hooded Sweatshirt Outwear Christmas Party Pullover (3XL, Black) – Price Drop

▶Asian Size Is 1-2 Size Smaller Than UK Size,Please Check The Size Detail Before You Purchase It. ▶ Asian Size:S — Bust:116cm/45.7″ Shoulder:60cm/23.6″ Sleeve:51cm/20.1″ Length:65cm/25.6″ ▶ Asian Size:M — Bust:120cm/47.3″ Shoulder:62cm/24.4″ Sleeve:52cm/20.5″ Length:67cm/26.4″ ▶ Asian Size:L — Bust:128cm/50.4″ Shoulder:64cm/25.2″ Sleeve:53cm/20.9″ Length:69cm/27.2″ ▶ Asian Size:XL — Bust:132cm/52.0″ Shoulder:66cm/26.0″ Sleeve:54cm/21.3″ Length:71cm/28.0″ ▶ Asian Size:2XL — Bust:136cm/53.6″ Shoulder:68cm/26.8″ Sleeve:55cm/21.7″ Length:73cm/28.8″ ▶Note: 1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness 2.Please allow slight deviation for the measurement data

  • ▶Asian Size Is 1-2 Size Smaller Than UK Size,Please Check The Size Detail Before You Purchase It.
  • ▶Season:Autumn,Winter– Style: Fashion, Causal– Material:Cotton blended
  • ▶It’s Suitable for Daliy,Party,Sport….
  • ▶Fashion Mens Hoodie Autumn Winter Print Hooded Sweatshirt Outwear Christmas Party Pullover,be more Handsome and Energetic
  • ▶Package include:1PC Hoodie—jackets mens winter coats for men hoodie top mens hoodie mens jackets cycling jackets fleece jacket mens coats winter sale mens jackets winter puffer jacket mens winter coats for men thermal coat mens formal shirts for men shirts mens denim shirt formal t shirts for men long sleeve shirt mens long sleeve tops men tops fashion men tops size Regular Fit Dress Shirt mens Slim Fit Button Down Shirt Oxford Shirt Classic Checked Printed Dress Shirts with Pocket

More Promoted: Sale Offers

UEETEK 5pcs Oxidation Treatment Aluminium Alloy 3D Printer Accessories 2GT Timing Belt Aluminum Gear Clamp Mount Block – Cut Rate

Description

This item is a 3D printer accessory manufactured with premium material for durable and long-lasting use. It’s easy to use and install with long service life. The precise design will ensure its practicability in the work of highly performance.

Features

– Color: as shown.– Material: aluminum alloy.– Size: approx. 4 x 0.9 x 0.9cm / 1.6 x 0.4 x 0.4inch.– Teeth width: 0.85mm.– Teeth depth: 0.9mm.– High quality for durable and long-lasting use.– Most ergonimic designs with impeccable craftsmanship.– Easy to use. Super practical accessory for 3D printers.– Perfect for your 3D printer.Package Including5 x Oxidation Treatment Aluminium Alloy 3D Printer Accessories 2GT Timing Belt Aluminum Gear Clamp Mount Block

  • High quality for durable and long-lasting use.
  • Most ergonimic designs with impeccable craftsmanship.
  • Easy to use. Super practical accessory for 3D printers.
  • Size: approx. 4 x 0.9 x 0.9cm / 1.6 x 0.4 x 0.4inch.
  • If you receive the product and found a quality problem, please contact us, we will provide you with comprehensive after-sales service.

Related Items: Sale Bargains

BIQU 3D printer Main Control Board Gen V1.4 with 5pcs DRV8825 Stepper Motor Driver RepRap Ramps1.4 MKS Mega2560 combined – Cheap Price

Specifications:

Gen V1.4 Controller: Can accept the 24V input, the same system power can be reduced to the hot bed current to 1/4, to effectively solve the problem of heat MOS tube heat. The firmware can use the open source firmware Marlin, configuration and ramps1.4 is the same, can directly replace Ramps1.4. Can be directly connected to the Ramps1.42004LCD control board and 12864LCD control board. Set aside the motor pulse and direction of the output port, easy to plug the big current to meet the large current (such as 2A, 5A) motor drive circuit. Reserved for Servos on Ramps1.4, AUX-1, AUX-2 interface, to provide 3 5V output, 3 12V output interface. Please note: in addition to the Item’s description of this page, we do not do provide any form of this product’s technical support of pre-sale and after-sales technical support, the use of all non product failure, please solve the problem.

DRV8825 Stepper Motor Drive: -Suitable for driving below 8.2V ~ 45V 2.5A stepper motor -Six different stepping resolutions: full, half, 1 / 4,1 / 8,1 / 16,1 / 32 -Adjustable potentiometer can adjust the maximum output current, resulting in higher step rate -Automatic current decay mode detection / selection -Thermal shutdown circuit, undervoltage lockout, crossover current protection -Ground short-circuit protection and load short-circuit protection

Package Included: 1*MKS Gen V1.4 control board 5*DRV8825 Stepper Motor Drive 5*Heat Sink 1*SB© USB Cable

  • Mega 2560 and ramps1.4 set on a board, to solve the problem of Ramps1.4 composite interface, easy to trouble
  • Can replace the motor drive, support 4988 drivers and 8825 drivers, tmc2100 drivers
  • The use of high quality MOSFET tube, better heat dissipation
  • The circuit board uses the high quality 4 plate, and has specially made the heat dissipation optimization processing; ramps is the 2 plate
  • The use of special power chip, support 12V-24V power input, to solve the problem of Ramps voltage conversion chip heating

List More: Sale Products

Mens Hoodie Patchwork Long Sleeve Tops Hooded Sweatshirt Jacket Outwear (XL, Black) – Special

▶Asian Size Is 1-2 Size Smaller Than UK Size,Please Check The Size Detail Before You Purchase It. ▶ Asian Size:M — Bust:112cm/44.1″ Sleeve:76cm/29.9″ Length:71cm/28.0″ ▶ Asian Size:L — Bust:116cm/45.7″ Sleeve:78cm/30.7″ Length:72cm/28.4″ ▶ Asian Size:XL — Bust:120cm/47.3″ Sleeve:80cm/31.5″ Length:73cm/28.7″ ▶ Asian Size:2XL — Bust:124cm/48.8″ Sleeve:81cm/31.9″ Length:74cm/29.1″ ▶ Asian Size:3XL — Bust:128cm/50.4″ Sleeve:82cm/32.3″ Length:75cm/29.5″ ▶Note: 1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness 2.Please allow slight deviation for the measurement data

  • ▶New For The Coming Season, An Essential For Every Fashion Man
  • ▶Season:Autumn,Winter– Style: Fashion, Causal– Material:Cotton blended
  • ▶It’s Suitable for Daliy,Work,Sport….
  • ▶Fashion Mens Autumn Slim Hoodie Top Long sleeve Sweatshirt,be more Handsome and Energetic
  • ▶Package include:1PC Tops—–jackets mens winter coats for men hoodie top mens hoodie mens jackets cycling jackets fleece jacket mens coats winter sale mens jackets winter puffer jacket mens winter coats for men thermal coat mens formal shirts for men shirts long sleeve mens denim shirt formal t shirts for men

Discounted: Sale Products

PoPprint 5Pcs Ramps1.4 A4988 Stepper Motor Driver with Heatsink for 3D Printer (Red) – Recommended

Condition:100%brand new

Color: Green,Red

Heat Sink: 9*9*5mm

A4988: 20*15*11mm

Package inculded:5pcs motor driver module

A4988 driver board widely used in 3D printers and small CNC machines Simple step and direction control interface Thermal protection, over-current protection, ground fault protection Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage toachieve higher step rates

We have the best products and professional sales and technical team, in the company’s development and growth in a year, we offer our customers the best products, good technical support and good after-sales service.If you have any problems,you can send email to tell us.We’ll do our best to solve your problems.

  • A4988 driver board widely used in 3D printers and small CNC machines.
  • A4988 driver modules:20*15*11mm,Heat Sink: 9*9*5mm
  • 3.3 and 5 V compatible logic supply.
  • Of five optional step mode: full, 1/2, 1/4, 1/8 and 1/16.
  • Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay).

Special Offers: Sale Bargains

1 2 3 23